International Conference Papers

1_ KARIMZADEH F., SAATCHI A., SALEHI M., "Control of burning and grain growth during microplasma arc welding of thin sheet alloy", Proceedings of welding and welded structures, PP. 68-76, 2003.

2_ KARIMZADEH F., SALEHI M., SAATCHI A., MERATIAN ISFAHANI M., "Effect of microplasma arc welding process parameters on porosity distribution of an alpha- beta titanium alloy weld", Proceedings of 3rd congress of iiw, PP. 110-117, 2003.

3_ KARIMZADEH F., SALEHI M., SAATCHI A., Kokabi A., "Microplasma arc welding of an aerospace alloy", Proceedings of The second international and fifth national conference of iranian aerospace society, PP. 437-442, 2004.

4_ ADIBISEDE S., ZEIAEIRAD S., KARIMZADEH F., "Finite element modeling of carbon nanotube based composites", Proceedings of 14th annual (international) conference on Mechanical Engineering (ISME2006) , 2006.

5_ KARIMZADEH F., "Mechanism of porosity formation in Ti6Al4V alloy weldment", Proceedings of 14th annual (international) conference on Mechanical Engineering (ISME2006) , 2006.

6_ ANVARI S., ENAYATI M., KARIMZADEH F., "Fabrication of intermetallic matrix nanocomposite", Proceedings of 1st International Congress on Nanoscience & Nanotechnology , 2006.

7_ FOROUZANMEHR N., ENAYATI M., KARIMZADEH F., "Fabrication and characterization of nanostructure Ti powder from residual machining chips", Proceedings of 1st International Congress on Nanoscience & Nanotechnology , 2006.

8_ JAFARI BAHRAMABADI M., HOSSEINI NOHOUJI N., ADIBISEDE S., ZEIAEIRAD S., KARIMZADEH F., "Mechanical properties evaluation of single-walled carbon nanotubes using molecular- dynamics based finite element approch", Proceedings of first International Congress on Nanoscience and Nanotechnology , 2006.

9_ MOUSAVI T., ABBASI M., ENAYATI M., KARIMZADEH F., "The effect of Al2O3 on synthesis of Ni nanocrystalline powders by high energy milling", Proceedings of 1st International Congress on Nanoscience & Nanotechnology , 2006.

10_ ADIBISEDE S., ZEIAEIRAD S., KARIMZADEH F., "Modeling considerations and material properties evaluation in analysis of polymer carbon nanotubes by using of square representative volume elements", Proceedings of  1st Conference of Nanotechnology in Environments, PP. 1, 2007.

11_ MOUSAVI T., ABBASI M., ENAYATI M., KARIMZADEH F., "Fabrication of Nickel nanostructured powder by milling", Proceedings of  1st Conference of Nanotechnology in Environments , PP. 204-210, 2007.

12_ KADKHODAPOUR J., ZEIAEIRAD S., KARIMZADEH F., HASANPOUR K., "Finite element analysis of tensile mechanical properties in nanocrystaline materials", Proceedings of 15th Annual (International ) Conference on Mechanical Engineering ( ISME 2007 ) , PP. 265, 2007.

13_ KHODAIE M., KARIMZADEH F., ENAYATI M., "Fabrication of iron-alumina nanocomposite powder by high energy ball milling of hematite-aluminum powder mixtures", Proceedings of International Conference on Ultrafine Grained and Nanostructured Materials , 2007.

14_ MOUSAVI T., KARIMZADEH F., ABBASI M., ENAYATI M., "Heat treatment of nanocrystalline NiTi intermetallic produced by mechanical alloying", Proceedings of International Conference on Ultrafine Grained and Nanostructured Materials , 2007.

15_ ANVARI S., KARIMZADEH F., ENAYATI M., "Fabrication of NiAl–Al2O3 nanocomposite by mechanical alloying", Proceedings of 2nd International Congress on Nanoscience & Nanotechnology , 2008.

16_ AZADEHRANJBAR S., KARIMZADEH F., ENAYATI M., "Fabrication and characterization of mechanically alloyed nanocrystalline FeNi alloy", Proceedings of 2nd International Congress on Nanoscience & Nanotechnology , 2008.

17_ EBNONNASIR A., KARIMZADEH F., ENAYATI M., "Using submerged friction stir processing to create nano grained bulk materials", Proceedings of 2nd International Congress on Nanoscience & Nanotechnology , 2008.

18_ KHODAIE M., ENAYATI M., KARIMZADEH F., "In-situ iron aluminide-alumina nanostructured cermet prepared by mechanochemical process", Proceedings of 2nd International Congress on Nanoscience & Nanotechnology , 2008.

19_ MOUSAVI T., KARIMZADEH F., ABBASI M., "Mechanism investigation of NiTi-20wt.%Al2O3 nanocomposite formation by mechanical alloying", Proceedings of 2nd International Congress on Nanoscience & Nanotechnology , 2008.

20_ SHAHNAM A., EBNONNASIR A., KARIMZADEH F., GOLOZAR M., "Achieving nanograin size in AZ31 Mg alloy by submerge friction stir", Proceedings of 2nd International Congress on Nanoscience & Nanotechnology , 2008.

21_ EBNONNASIR A., KARIMZADEH F., ENAYATI M., "Hardness evaluating of submerged friction stir processed Al-6061-T6 plate by a novel artificial neural network model", Proceedings of Iran International Aluminium Conference ( IIAC 2009 ) , 2009.

22_ HOSSEINI NOHOUJI N., ABBASI M., KARIMZADEH F., ENAYATI M., "The effect of milling time on tribological properties of Al6061-Al2O3 nanocomposite prepared by milling and hot pressing methods", Proceedings of Iran International Aluminium Conference ( IIAC 2009 ) , 2009.

23_ JAFARI BAHRAMABADI M., ABBASI M., ENAYATI M., KARIMZADEH F., "Fabrication and tribological properties of bulk nanostructured Al2024 alloy", Proceedings of Iran International Aluminium Conference ( IIAC 2009 ) , 2009.

24_ MOHAMMAD SHARIFI E., KARIMZADEH F., ENAYATI M., "Fabrication of nanocrystalline Al matrix hybrid composite by mechanical milling", Proceedings of Iran International Aluminium Conference (IIAC 2009 ) , 2009.

25_ ENAYATI M., HEIDARPOUR A., KARIMZADEH F., "Fabrication and characterization of Al2O3/Mo nanocomposite", Proceedings of 16th International Symposium on Metastable,Amorphous and Nanostructured Materials ( ISMANAM 2009 ) , 2009.

26_ DABBAGH A., RASTI E.-., KARIMZADEH F.M.S.YALGHAEE, MEDINA F., "A new route to synthesis of gama- alumina nanorods", Proceedings of 3rd Conference on Nanostructures ( NS2010 ), PP. 200-203, 2010.

27_ RAFIEI M., ENAYATI M., KARIMZADEH F., "MA behavior of Fe-Al-Ti system to produce nanocrystalline (Fe,Ti)3Al intermetallic compound", Proceedings of 3rd Conference on Nanostructures (NS2010 ), PP. 48-50, 2010.

28_ SABOONI S., MOUSAVI T., KARIMZADEH F., "Study on the formation mechanisem of in-situ Cu(Mo)/Al2O3 nanocomposite", Proceedings of 3rd Conference on Nanostructures ( NS2010 ), PP. 264-266, 2010.

29_ YAZDIAN N., KARIMZADEH F., TAVOOSI M., "Fabrication of bulk nanostructure Al7075 alloy by mechanical alloying and hot pressing", Proceedings of 3rd Conference on Nanostructures ( NS2010 ), PP. 157-159, 2010.

30_ ZAERI M., ZEIAEIRAD S., KARIMZADEH F., "Mechanical modeling of carbon nanotubes", Proceedings of 3rd Conference on Nanostructures ( NS2010 ), PP. 1233-1235, 2010

31-FOROOZMEHR A., ENAYATI M., KARIMZADEH F., "Austenite-Martensite transformation in nanostructured AISI316L stainless steel powder induced during mechanical alloying", Proceedings of 17th International Symposium on Metastable, Amorphous and Nanostructured Materials ( ISMANAM 2010) , 2010.

32-HOSEINI S.N., KARIMZADEH F., ENAYATI M., "In-situ synthesis of Al2O3-Co certamic nanocomposite by mechanical alloying", Proceedings of 3rd International Congress on Nanoscience and Nanotechnology , 2010.

33- LOEIAN S., FARHADI F., KARIMZADEH F., BEHBAHANI S., "Ultrasonic surface nanocrystallization (USN) treatment", Proceedings of 3rd International Conference on UltraFine Grained and NanoStructured Materials (UFGNSM 2011) , 2011.

34-MOAZENI M., M0RADI M., TORKAN S., KERMANPOUR A., KARIMZADEH F., "Effect of process parameters on the synthesis of Ti and TiO2 nanoparticles produced by electromagnetic levitational gas condensation", Proceedings of 3rd International Conference on UltraFine Grained and NanoStructured Materials (UFGNSM 2011), PP. 30-38, 2011.

35-RASTAR V., KARIMZADEH F., ENAYATI M., "Effect of Particle content on grain growth and properties of Al-Al2O3 nanocomposites produced by mechanical alloying and hot - pressing", Proceedings of 3rd International Conference on UltraFine Grained and NanoStructured Materials (UFGNSM 2011), PP. 1-8, 2011.

 36-SALEHI KAHRIZSANGI P., KARIMZADEH F., ENAYATI M., ABBASI M., "On the formation mechanism of nanostructured in-situ Ti6Al4V alloy during mechanical alloying", Proceedings of 3rd International Conference on UltraFine Grained and NanoStructured Materials (UFGNSM 2011) , 2011.

37-TAHERI ESNAASHARI M., KARIMZADEH F., ENAYATI M., "Development of nanostructured Al-Mg-Si alloys", Proceedings of 3rd International Conference on UltraFine Grained and NanoStructured Materials (UFGNSM 2011), PP. 20-28, 2011.

38-YAZDANI Z., KARIMZADEH F., ABBASI M., "A study on the mechanochemical behavior of Nb2O5–Al–Si system to produce NbSi2–Al2O3 nanocomposite", Proceedings of First International Conference on Nanostructures and Nanomaterials : Science and Application , PP. 1, 2012.

39-YAZDANI Z., KARIMZADEH F., ABBASI M., "Thermodynamic analysis and characterization of nanostructured NbSi2 intermetallic compound prepared by mechanical alloying", Proceedings of 4th international conference on nanostructures ICNS4, PP. 87, 2012.

 

ارتقاء امنیت وب با وف ایرانی آسپا-وف